LEEB HARDNESS TESTER
Tester works according to the Leeb rebound hardness test method for metallic materials to find out the hardness value and its available into HRC, HB, HV, HRB, HL, HS scales in addition to measure the corresponding tensile strength of various metallic materials
FEATURES:
- Average, standard deviation, minimum, maximum
- Resulting in GOOD/BAD report format
- 500000 results storage capacity
- Data transfer via USB Drive
- Simple and ergonomic device to use
UCI HARDNESS TESTER
A new version of the popular Multi-functional hardness tester with the ability to work with both contact impedance measurement methods (UCI) and the dynamic Leeb method. It is intended for local express measurement of hardness in QA/QC Testing laboratory, Fabrication workshop and oil gas field conditions. The combination of dynamic and ultrasonic methods provides the versatility of using this device for testing various products. The hardness tester allows you to measure the hardness of metal products (steel, cast iron, non-ferrous metals, etc.)
POLDI HARDNESS TESTER
The hammer type Poldi Hardness Tester is suitable for measuring the Brinell Hardness of Steel, Cast iron, Brass Aluminum, Copper etc. This Poldi Hardness Tester is useful to test parts where bench type model is not useful. This type of machine is most ideal and simple for foundries, workshops, Engineering fabrication companies, Technical Institutions etc. Load is applied by a hammer below on the specimen and a standard test bar in linear direction through a hardened steel ball of 10 mm dia. The impact load on both is the same. The extent of indentation on the specimen and the test bar depends on their hardness.
ULTRASONIC FLAW DETECTOR
Portable small-size general-purpose ultrasonic flaw detectors. They realize standard and special-purpose methods of ultrasonic inspection providing high efficiency and accuracy of measurements. Ultrasonic flaw detection can potentially be applied to any standard engineering material to find hidden cracks, voids, porosity, inclusion, and similar discontinuities. While most tests involve steel and other structural metals All features of an up-to-date flaw detector in a compact case. Ideal for work at hard-to-reach places. Ergonomic case of shockproof plastic – the device can be held with one hand. Large high-contrast color display with high resolution (640*480 pixels) enables you to work for a long time without straining your eyes
INDUSTRIAL BOROSCOPE
Industrial Boroscope or endoscope is the Device are mostly used to inspect mechanical objects, such as pipes welded tubes and most commonly used into oil & gas industry sector Its enhanced high definition camera can capture the high quality picture and video of the defects of confined surface with articulation option. Where you’ll need to inspect pipes or mechanical objects, borescopes are the better choice for the better suited to examine.
The advanced feature can help us to get the output results in any medium with user friendly to improve testing productivity.
HOLIDAY DETECTOR
Holiday testing is a non-destructive test method applied on protective coatings to detect unacceptable discontinuities such as pinholes and voids. The test involves checking an electric circuit to see if current flows to complete the circuit. This testing is used to find coating film discontinuities that are not readily visible. The testing is usually performed on tank interiors, chemical storage vessels and buried structures because of the importance of maintaining adequate coating protection in aggressive service environments. UV Pinhole Detection, Wet Sponge Technique, High Voltage Technique.